Garage Door Spring Repair Services
Request an estimate for spring repair
A broken spring is one of the most common reasons a garage door stops working. The door may not lift, may jerk, or may slam down. The spring holds most of the door's weight, so this is not a job for guesswork.
Bobsame Garage Doors is a referral service. We connect Overland Park homeowners with independent providers in our network who handle spring replacement. The provider does the work and sets the price. Our advice is simple: fix it, then maintain it. Compare written quotes, ask what drives the cost, and plan a little upkeep so the new springs last as long as they can.
Broken Spring? Stop and Stay Safe
If you think a spring let go, stop using the door. Do not pull the release cord with a car underneath. Do not try to lift a heavy door by hand. A door can weigh well over 100 pounds, and without a working spring it can drop fast.
Keep kids and pets out of the garage. Then Request a callback to check provider availability, or send a request through the form.
How to Tell if a Spring Is Broken
Some signs are loud. Others are easy to miss. Look for these:
- A sharp bang from the garage, like something snapped
- A door that rises a few inches and stops
- An opener that hums or strains but does not lift
- A visible gap in the coil above the door
- Cables that hang loose or look slack
- A door that feels very heavy when you lift it by hand with the opener disconnected
One more clue: a door that sags on one side may have a worn spring or cable. That is worth a look before it fails fully.
Torsion Springs vs. Extension Springs
Most homes have one of two types. Torsion springs sit on a bar above the door opening. They twist to lift the door. Extension springs run along the horizontal tracks on each side. They stretch and relax.
Torsion systems usually cost more up front. They tend to lift more smoothly and often last longer. Extension systems cost less, but they need safety cables, and a snapped spring can whip around. A provider can tell you which kind you have and whether switching makes sense for your door.
Why You Shouldn't Replace Springs Yourself
Spring tension is stored force. Wound torsion springs can cause serious injuries if a tool slips. Kits sold online often have the wrong size, and a wrong spring makes the door lift unevenly or wear out early.
A budget-minded fix can turn into an expensive one. A trip to the emergency room costs far more than a professional visit. Paying a provider for the job is usually the cheaper choice once you count the risk.
What a Spring Replacement Visit Includes
The exact steps vary by provider. A typical visit covers:
- Checking the door weight and measuring the old spring
- Matching the new spring to your door, not just to the old one
- Safely releasing and removing the broken parts
- Installing and winding the new spring
- Checking cables, rollers and track alignment
- Testing balance by lifting the door by hand
A balanced door should stay put when lifted halfway. If it drifts, the tension needs a tweak.
Standard vs. High-Cycle Springs
Springs are rated by cycles. One cycle is one open and one close. Standard springs often last around 10,000 cycles. High-cycle versions are made to last longer, sometimes two to three times as many.
Think in cost per year. If your family uses the door several times a day, the extra spend on a high-cycle spring may pay off. If the door is used once a day, standard may be enough. Ask the provider to quote both.
Replace Springs in Pairs?
On a two-spring door, many providers suggest replacing both at once. The second spring has the same age and wear as the first. It often fails soon after. Doing both in one visit can save a second service charge. Ask for the pair price and the single price so you can compare.
Questions to Ask the Provider
A few plain questions go a long way:
- Is the quote in writing, with parts and labor listed?
- What spring size and cycle rating will you use?
- Will you check the cables, rollers and track alignment too?
- Is there a warranty on parts and labor, and what does it cover?
- Is there a trip charge, or an added fee for emergency garage service?
A good answer is clear and specific. Red flags include a price that changes at the door, pressure to replace the whole system for a simple spring, or no written quote at all.
Weather and Your Springs
Big temperature swings are hard on metal. Cold, dry winters can make parts stiffer and stress the coils. Spring storms and high winds can knock a door out of line, which adds strain on the springs. If your garage faces the wind, check your door after a storm.
Fix It, Then Maintain It
The repair is only half the plan. A little upkeep protects what you just paid for:
- Once a month, lift the door by hand with the opener disconnected and check the balance
- Twice a year, apply garage door lubricant to springs, rollers and hinges
- Look at the cables for fraying
- Watch for track alignment problems, like scraping or a door that wobbles
- Schedule a yearly tune-up with a provider
If your opener is old and strained, ask about a new garage door opener at the same visit. Do not make that choice under pressure, though. Get it quoted on its own line.
Repair Now, Prevent Later
A tune-up costs a fraction of a surprise breakdown. It can also catch a worn spring before it snaps. Ask the provider to note the date and the spring's cycle rating so you can plan the next check.
Compare Written Quotes
Get at least two quotes if you can. Look at the spring type, the number of springs, the labor, and any extra parts. A small-looking number is not always the real total. Compare line by line, then choose the one that is clear and fair to you.
Some policies may cover sudden damage, so check your policy. Providers can often help document damage for a claim.
What's Included
Spring Size Matching
The provider measures your door and picks a spring that fits its weight, not just the old part.
Safe Removal
The broken spring is released and removed with proper tools so tension is handled safely.
New Spring Installation
A torsion or extension spring is fitted and wound to the right tension.
Balance and Track Check
Cables, rollers and track alignment get a quick look, and the door is tested for balance.
What Spring Repair Typically Costs
Prices vary by door size, spring type and your area. These are typical U.S. ranges only, not quotes. Providers set their own prices, so ask for a written quote that lists parts and labor before work begins.
| Item | Typical range | Notes |
|---|---|---|
| Extension spring pair | $150 – $350 | Needs safety cables; usually the lower-cost option |
| Single torsion spring | $200 – $450 | Price rises with door weight and size |
| Torsion spring pair | $250 – $600 | Often done together to avoid a second visit |
| High-cycle spring upgrade | $100 – $300 extra | Longer life; helps if the door is used often |
| Cable or roller replacement | $75 – $250 | Often checked during the same visit |
| Track alignment adjustment | $75 – $200 | May be needed if the door has shifted |
How It Works
Stop and Secure
Leave the door alone, keep people and pets clear, and note any noises or gaps that you saw.
Send a Request
Use the form or Request a callback to check provider availability in your area.
Compare Written Quotes
Review spring type, cycle rating, labor and warranty before you pick a provider.
Replace, Then Maintain
Have the spring installed, then follow a simple upkeep schedule to protect it.
Why Call Bobsame Garage Doors
Fair Written Quotes
Providers in our network can give itemized quotes so you can compare costs.
Safety First
Spring work carries real risk, so a trained local provider handles the dangerous steps.
Upkeep Advice
Ask about lubrication and yearly checks so new springs reach their full life.
Simple Referral
One request connects you with a local provider, and there is no obligation.
Other Services
Need garage door spring repair services in Overland Park?
Tell us what your garage door is doing. A local provider in our network can review it and send a written estimate, with no obligation.
Garage Door Spring Repair Services FAQ
How do I know if my garage door spring is broken?
Common signs include a loud bang, a door that will not lift, a visible gap in the coil, or loose cables. If you suspect it, stop using the door and ask a provider to inspect.
How much does garage door spring repair cost?
Typical U.S. costs run from about $150 to $600, depending on the spring type, door size and whether you replace one or two. Providers set their own prices, so compare written quotes.
Can I replace a garage door spring myself?
It is not recommended. Springs hold a lot of stored force and can cause serious injury. Wrong sizes also cause uneven lifting. A local provider has the tools and training to do it safely.
Get in touch
Tell us what your garage door is doing. A local provider in our network can review it and send a written estimate, with no obligation.
No obligation